Diagnostics, Lightpulse fc hba diagnostics – Dell Emulex Family of Adapters User Manual
Page 264
OneCommand™ Manager Application
P010066-01A Rev. A
13. Diagnostics
LightPulse FC HBA Diagnostics
264
13. Diagnostics
Note: Diagnostics are not supported on COMSTAR ports.
LightPulse FC HBA Diagnostics
This section describes the diagnostics available for LightPulse FC adapters. For
OneConnect adapter diagnostics, see “OneConnect Diagnostics” on page 276.
Use the Diagnostics tab to:
View flash load list, PCI registers and wakeup parameter information.
Run these tests on Emulex adapters installed in the system: (Not available in
read-only mode.)
PCI Loopback
Internal Loopback
External Loopback
Power-On Self Test (POST)
Echo (End-to-End)
Quick Test
Perform a diagnostic dump and retrieve dump files from remote hosts. (Not
available in read-only mode. For 16Gb/s HBAs, refer to “Creating Diagnostic
Dumps” on page 282 in the “OneConnect Diagnostics” section.)
Control adapter beaconing (Not available in read-only mode.)