Dell Emulex Family of Adapters - Manual (Page 482)

Offline and Online Adapter Management Utilities Version 10.2 User Manual P010071-01A Rev. A
3. Adapter Management Utility Command Line Interface
VPD (/vpd)
482

A per adapter message for each adapter that the Adapter Management Utility
did not update
FC Adapter Download Summary
<date><time>
HBA=<model>, Port Type=<port_type>, WWN=<wwn>,
Update=<Boot Code|Firmware>, Image=<image>, New=<version>,
Old=<version>, Status=<description>
FCoE Adapter Download Summary
<date><time>
HBA=<model>, Port Type=<port_type>, WWN=<wwn>,
Update=Firmware, Image=<image>, New=<version>, Old=<version>,
Status=<description>
iSCSI and NIC-only Adapter Download Summary
<date><time>
HBA=<model>, Port Type=<port_type>, MAC=<mac_address>,
Update=Firmware, Image=<image>, New=<version>, Old=<version>,
Status=<description>
Return Code=<n>
where <description> is Success or Error, and <n> = 0 for completion with no errors or a
non-zero error code for any error.
VPD (/vpd)
Note: The VPD command applies to ElxflashOffline and Elxflash Standalone utilities
only.
Usage:
/vpd
The vpd command displays the VPD model name for supported adapters. You must
use the VPD command with one of the following switches:

/f - Force firmware and boot

/fb - force boot code

/ff - force firmware

/xml - XML output

/downgrade or /g

/query or /q

/rewrite or /e

/update