Cnacleareventlog, Cnageteventlog – Dell Emulex Family of Adapters User Manual
Page 399
OneCommand Manager Command Line Interface Version 10.2 User Manual
P010067-01A Rev. A
5. CLI Client Command Descriptions
Miscellaneous Commands
399
Parameters
CnaClearEventLog
Note: Supported for OneConnect and LPe16202 adapters only.
This command clears the event log specified by the WWPN or MAC address.
Supported By
Linux, VMware ESXi, and Windows
Syntax
CnaClearEventLog <WWPN|MAC>
Parameters
CnaGetEventLog
Note: Supported for OneConnect adapters only.
This command shows the adapter event log specified by the WWPN or MAC address.
Supported By
Linux, VMware ESXi, and Windows
Syntax
CnaGetEventLog <WWPN|MAC>
Parameters
host_address
The IP address (using the IPv4 or IPv6 format) or the host name.
IP_Address
The IP address of the host.
WWPN
The WWPN of an FCoE port.
MAC
The MAC address of a NIC or iSCSI port.
WWPN
The WWPN of an FCoE port.
MAC
The MAC address of a NIC or iSCSI port.