Dell Emulex Family of Adapters - Manual (Page 1594)

Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual P010097-01B Rev. A
6. Using the FCoE Boot BIOS Utility for x86 and x64 Architectures
Resetting to Default Values
1594
To reset parameters to their factory default settings:
1. On the main configuration menu (Figure 6-2) select Reset Adapter Defaults and
press <Enter>. A screen is displayed that asks if you want to reset to the defaults.
Figure 6-22 Reset Adapter Configuration to Defaults Screen
2. Press <Y>. All settings revert to their factory default values.
3. Press <Esc> to go to the previous menu.