Dell Emulex Family of Adapters - Manual (Page 1352)

OCM for VMware vCenter Version 10.2 User Manual P009805-01A Rev. A
11. Using OneCommand Manager for VMware vCenter Command Line Interface
The Command Reference
1352
Description
This command shows the dump file directory for the FCoE, NIC or iSCSI port in the
host.
Note: The dump directory applies to all adapters in the server. There is not a separate
dump directory for each adapter.
Parameters
getdumpfilenames
Syntax
elxvcpcmd.exe v=<vcenter_server> u=<vc_username> p=<vc_password>
h=<esx_host> getdumpfilenames <WWPN | MAC>
Description
This command shows a list of all the dump filenames for a given port.
Parameters
getfcfinfo
Syntax
elxvcpcmd.exe v=<vcenter_server> u=<vc_username> p=<vc_password>
h=<esx_host> getfcfinfo <WWPN>
Description
This command shows the FCF information of an adapter in FCoE mode.
v
The vCenter server IP address.
u
The user name for the vCenter server.
p
The user password for the vCenter server.
h
The IP address of the ESXi host with Emulex adapters.
WWPN
The WWPN of a port on the ESXi host with Emulex adapters.
MAC
The MAC address of the NIC or iSCSI port.
v
The vCenter server IP address.
u
The user name for the vCenter server.
p
The user password for the vCenter server.
h
The IP address of the ESXi host with Emulex adapters.
WWPN
The WWPN of a port on the ESXi host with Emulex adapters.
MAC
The MAC address of the NIC or iSCSI port.