Dell Emulex Family of Adapters - Manual (Page 1707)

Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual P010097-01B Rev. A
13. Configuring UEFI for FCoE
Configuring Adapter Parameters
1707

EFIFCScanLevel: NVRAM Targets – Boot scan sets the EFIFCScanLevel
environment variable to inform the driver to configure only targets in the
NVRAM boot table.

EFIFCScanLevel - Discovered Targets – Boot scan sets the EFIScanLevel
environment variable to inform the driver to configure all available targets on
the SAN.
To change the boot target scan method:
1. From the Device Manager screen (Figure 13-2), select the adapter whose boot target
scan method you want to change and press <Enter>.
2. From the Emulex Adapter Configuration Main Menu (Figure 13-3), select
Configure HBA Parameters and press <Enter>. The Configure HBA Parameters is
displayed.
3. From the Configure HBA Parameters menu, select Boot Target Scan Method and
press <Enter>. The Boot Target Scan Method menu is displayed.
Figure 13-17 Configure HBA Parameters – Boot Target Scan Method Menu
4. Select a boot scan option and press <Enter>. The screen is refreshed with the
modified value.
Note: If you have a large SAN and set the boot path to “Boot Path Discovered
Targets,” discovery takes a long time. Press <Esc> to return to the EFI utility
menu.
5. Select Commit Changes and press <Enter>. The Emulex Adapter Configuration
Main Menu is displayed.