Dell Emulex Family of Adapters - Manual (Page 900)

Emulex Drivers Version 10.2 for Linux User Manual P010081-01A Rev. A
4. Troubleshooting
Log Messages
900
0368: Mis-matched fast-path completion queue identifier: eqcqid=%d, fcpcqid=%d
The CQID in the event queue entry does not match the fcp_cqid that was passed into the routine.
Data: None
Severity: Error
Log:
LOG_SLI
Action: None required.
0369: No entry from fast-path completion queue fcpcqid=<queue_id>
There were no completions in the completion queue referenced by fcp_cqid.
Data: None
Severity: Error
Log:
LOG_SLI
Action: None required.
0370: Invalid completion queue type <type>
The event queue entry is not for a mailbox or a work queue entry.
Data: None
Severity: Error
Log:
LOG_SLI
Action: None required.
0371: No entry from the CQ: identifier <queue_id>, type <type>
There was no completion queue event for this event queue entry.
Data: None
Severity: Error
Log:
LOG_SLI
Action: None required.
0372: iotag <iotag> is out of range: max iotag (<sli.last_iotag>)
The IOCB lookup cannot be performed because the iocb_tag is out of range.
Data: None
Severity: Error
Log:
LOG_SLI
Action: None required.
0373: FCP complete error: status=<status> hw_status=<hw status>,
total_data_specified=<total data transferred>, parameter=<rsp word[4]>,
word3=<wcqe word 3>
Logs the FCP failure. Status and parameter are equivalent to ulpStatus and ulpWord[4].
Data: None
Severity: Warning
Log:
LOG_SLI
Action: None required.
0374: FCP complete with no corresponding cmdiocb: iotag <iocb iotag>
There was no IOCB on the in-progress list that matched this iotag.
Data: None
Severity: Warning
Log:
LOG_SLI
Action: None required.
Table 4-4 LPFC Error Log Messages and their Descriptions (Continued)