Dell Emulex Family of Adapters - Manual (Page 776)

OneCommand NIC Teaming and VLAN Manager User Manual P009415-01A Rev. A
3. Using the OneCommand NIC Teaming and VLAN Manager
Configuring a VLAN
776
Configuring a VLAN Adapter
To configure a VLAN adapter:
1. From the Start menu click All Programs>Emulex>OneCommand Teaming and
VLAN Manager to start the application. The General tab is displayed.
2. Select an Emulex adapter from the available adapter list in the discovery-tree.
3. Select the Create VLAN Adapter tab. The Create VLAN Adapter tab is displayed.
Figure 3-15 Create VLAN Adapter Tab
4. Enter a starting VLAN ID. Valid tag values are from 1—4094. The VLAN Name
shows the VLAN Name in the format VLAN_<VLAN ID>.
5. Enter the number of VLANs to create.
6. Click Add VLAN to add the VLAN to the adapter. You can create up to 48 VLANs
for an adapter. The Configured VLANs area shows the list of VLANs configured for
the adapter. The VLAN Name shows the VLAN Name in the format
VLAN_<VLAN ID>.
7. Click Apply. The VLAN is added to the selected adapter.
Modifying a VLAN ID of a VLAN Adapter
You may want to reprogram the VLAN that is added to a team or VLAN adapter. You
can change the VLAN ID without having to delete and recreate the VLAN with a new
VLAN ID. The IP Addresses assigned to the VLAN remain attached to the VLAN
regardless of the ID change.