Dell Emulex Family of Adapters - Manual (Page 1334)

OCM for VMware vCenter Version 10.2 User Manual P009805-01A Rev. A
11. Using OneCommand Manager for VMware vCenter Command Line Interface
The Command Reference
1334
Example
elxvcpcmd.exe attributes help
Information returned
Commands for Attributes
listhbas, hbaattributes, portattributes, pcidata, getvpd
Parameters
None.
changepersonality
Syntax
elxvcpcmd.exe v=<vcenter server> u=<vc_username> p=<vc_pwd> <h=ESXhostIP>
changepersonality <WWPN | MAC> <type> [FCoE\iSCSI\NIC]
SR-IOV A set of commands that allows
multiple VFs to be created on a NIC
PF for an adapter port.
Note: SR-IOV is not supported with
UMC channel management.
“listvfuncs”
“sriovenable”
TargetAndLuns A set of commands enabling an ESXi
host to read targets and LUNS
attached to the port on an Emulex
adapter.
“getiscsiluns”
“getlunlist”
“showtarget”
“targetmapping”
VEPA A set of commands that show the
VEPA state and enable/disable the
VEPA state.
Note: VEPA commands are only
supported on the
OCe14000–series adapters.
Note: VEPA commands require that
SR-IOV is enabled.
“VEPAenable”
Virtual Machines A set of commands enabling an ESXi
host to find Virtual Machines and
their attached ports.
“listvms”
“listvports”
WWWNManagement A set of commands enabling an ESXi
host to read and manage the WWN
details for the port on an Emulex
adapter.
“changewwn”
“getwwncap”
“readwwn”
“restorewwn”
Table 11-1 Group and Supported Commands (Continued)
Group Definition Supported Commands