Fecenable, Getcimcred, Getelxsecinfo – Dell Emulex Family of Adapters User Manual
Page 401
OneCommand Manager Command Line Interface Version 10.2 User Manual
P010067-01A Rev. A
5. CLI Client Command Descriptions
Miscellaneous Commands
401
Parameters
FecEnable
This command enables or disables FEC on LPe16000-series FC adapters.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
FecEnable WWPN <0|1>
Parameters
GetCimCred
This command shows the default credentials set for the CIM client.
Note: The password is encrypted.
Supported By
Windows
Syntax
GetCimCred
Parameters
None.
GetElxSecInfo
This command shows the version of the ElxSec system.
Supported By
Windows and Linux
format
An optional parameter that specifies the format of the adapter information:
csv
xml
Note: Leaving the format blank shows the data in xml format (default).
WWPN
The WWPN of the FC port.
0
Disables FEC on the port
1
Enables FEC on the port