Dell Emulex Family of Adapters - Manual (Page 393)

OneCommand Manager Command Line Interface Version 10.2 User Manual P010067-01A Rev. A
5. CLI Client Command Descriptions
iSCSI Commands
393
TargetLogout
This command logs out of a target.
You must specify the iSCSI target name <iscsi_target_name> and either the TSIH
<TSIH> of the session, or the session’s ISID Qualifier <ISID_Qual> and the target’s IP
address <Target_IP>.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
TargetLogout <MAC_Address> <iscsi_target_name> <TSIH | <ISID_Qual
Target_IP>>
Parameters
TgtCHAPName
The Target CHAP name enclosed in quotes (string length: 1–255
characters).
Note: The Target CHAP name is required it you set Auth to 1
or 2.
TgtSecret
The Target Secret enclosed in quotes (string length: 12–16
characters).
Note: The Target CHAP name is required it you set Auth to 1
or 2.
InitCHAPName
The Initiator CHAP name enclosed in quotes (string length:
1–255 characters).
Note: The Target CHAP name is required it you set Auth to 2.
InitSecret
The Initiator Secret enclosed in quotes (string length: 12–16
characters).
Note: The Target CHAP name is required it you set Auth to 2.
MAC_Address
The MAC address of an iSCSI port.
iscsi_target_name
The target’s iSCSI name enclosed in quotes (string length:
11–255).
TSIH
The TSIH value of the session. The possible values are 1–65535.
ISID_Qual
The ISID qualifier of the session. The possible values are
0–65535.
Target_IP
The target's IP address.