Dell Emulex Family of Adapters - Manual (Page 1637)

Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual P010097-01B Rev. A
11. Configuring UEFI for Ethernet
Starting the Emulex NIC Configuration Utility
1637

Custom – For more information on the Custom personality, see “Selecting the
Custom Personality” on page 1639.
The menu only displays the available personalities, including both free and licensed
personalities.
To view the personalities supported on the adapter:
1. Select Personality on the Emulex NIC Selection Screen (Figure 11-2), and then press
<Enter>. The Personality Selection screen appears.
2. Select the current personality setting and press <Enter>. A pop-up menu appears
with a list of available personalities.
Figure 11-7 Personality Selection Screen with Pop-up Menu
To change the personality of the adapter:
1. On the Personality Selection pop-up menu (Figure 11-7), select the desired
personality and press <Enter>.
2. Select Save and press <Enter>.
Note: Additional configuration changes may be made after changing the Personality
setting; however, a reboot is required before the new Personality setting will
take effect.