Dell Emulex Family of Adapters - Manual (Page 165)

OneCommand™ Manager Application P010066-01A Rev. A
8. Managing Adapters and Ports
iSCSI
165
To view iSCSI network information:
1. Select Host or Fabric view.
2. Select an iSCSI port in the discovery-tree.
3. Select the iSCSI Network Information tab.
Figure 8-35 iSCSI Network Information Tab
iSCSI Network Information Tab Field Definitions
Connection Info Area

Link Status – The status of the link on the selected adapter port.

Port Speed – The port speed at which the selected port is running.

Min. Bandwidth – The minimum bandwidth (i.e. speed) at which the port is
guaranteed to run.

Max. Bandwidth – The maximum bandwidth (i.e. speed) at which the port is
guaranteed to run.
TCP/IP Configuration Area
IPV4 Address

DHCP Enabled – Check the box to use DHCP authentication on the selected
port.

IP Address – The iSCSI initiator IP address.

Subnet Mask – The iSCSI initiator subnet mask.

Gateway Address – The iSCSI initiator gateway address.

VLAN Enabled – Check the box to allow VLAN for the iSCSI interface.