Dell Emulex Family of Adapters - Manual (Page 1651)

Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual P010097-01B Rev. A
11. Configuring UEFI for Ethernet
Starting the Emulex NIC Configuration Utility
1651
IBM Virtual Fabric Mode Multichannel Configuration
To configure the multichannel configuration when the Multichannel Mode is set to IBM
Virtual Fabric Mode:
1. On the Emulex NIC Selection screen, select Controller Configuration and press
<Enter>. A list of available options is displayed.
Figure 11-19 IBM Virtual Fabric Mode Controller Configuration Screen
2. From the Controller Configuration screen, you can perform the following tasks:

View the current configuration of each function – see “Viewing the
Configuration” on page 1646.

Configure the LPVID per function – see “Configuring the LPVID” on page 1648.

Save the current configuration – see “Saving the Configuration” on page 1649.