Dell Emulex Family of Adapters - Manual (Page 132)

OneCommand™ Manager Application P010066-01A Rev. A
8. Managing Adapters and Ports
FC/FCoE
132
Mapping Information Area

FCP LUN – The FC identifier used by the adapter to map to the SCSI OS LUN.

SCSI OS LUN – The SCSI identifier used by the operating system to map to the
specific LUN.

OS Device Name – The name assigned by the operating system to the LUN.
LUN Capacity Area
Note: LUN capacity information is only provided when the LUN is a mass-storage
(disk) device. Other devices like tapes and scanners, etc. do not display
capacity.

Capacity – The capacity of the LUN, in megabytes.

Block Size – The length of a logical unit block in bytes.
LUN Masking Area

Current Mask Status – Possible states are masked or unmasked.
See “Masking and Unmasking LUNs (Windows)” on page 138 for more
information on LUN Masking.
Viewing FC/FCoE Target Mapping (Windows and Solaris)
The Target Mapping tab enables you to view current target mapping and to set up
persistent binding.
Note: Persistent binding is not supported on Solaris systems. The Target Mapping tab
is not available on COMSTAR ports.
To view target mapping:
1. Select Host or Fabric view.
2. In the discovery-tree, select the FC/FCoE adapter port whose target mapping
information you want to view.