Dell Emulex Family of Adapters - Manual (Page 333)

OneCommand Manager Command Line Interface Version 10.2 User Manual P010067-01A Rev. A
5. CLI Client Command Descriptions
Attributes Commands
333
Parameters
PortStatistics
This command shows all port statistics for the adapter. The type of information listed
may vary according to the adapter model.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
PortStatistics <WWPN>
Parameters
ServerAttributes
This command shows a list of server attributes for the adapter. The type of information
listed may vary according to the adapter model.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
ServerAttributes <WWPN|MAC>
Parameters
SetPhyPortSpeed
This command sets the port speed on OneConnect OCe11100-series, OCe14000-series
and LPe16202 adapters only.
OneConnect OCe11100-Series and OCe14000-Series Adapters
OneConnect OCe11100-series, OCe14000-series have the capability to configure their
physical port speeds. Depending on the port module or transceiver installed in the
physical port, the speed settings can be forced to a specific value, for instance 1 Gb, or
h
The IP address of the host.
WWPN
The WWPN of an FC or FCoE port.
MAC
The MAC address of a NIC or iSCSI port.
WWPN
The WWPN of an FC or FCoE port.
WWPN
The WWPN of an FC or FCoE port.
MAC
The MAC address of a NIC or iSCSI port.