Enabling and disabling vepa on nic sr-iov ports, Figure 8-50 – Dell Emulex Family of Adapters User Manual
Page 191
Advertising
OneCommand™ Manager Application
P010066-01A Rev. A
8. Managing Adapters and Ports
NIC
191
5. Reboot to change the SR-IOV state.
Figure 8-50 Port Information Dialog Box with NIC VF selected
Enabling and Disabling VEPA on NIC SR-IOV Ports
The VEPA checkbox is displayed when SR-IOV is currently enabled on the NIC
function. Check/uncheck the Enable VEPA checkbox under the Enable SR-IOV
checkbox to enable/disable VEPA for the virtual functions on the NIC port.
Note: VEPA is only available on OCe14000 series adapters.
Note: SR-IOV is not supported with UMC.
Advertising