Scanning for target devices, Scanning for target devices 0, Figure 6-3 – Dell Emulex Family of Adapters User Manual
Page 1580: Figure 6-4
Advertising
Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual
P010097-01B Rev. A
6. Using the FCoE Boot BIOS Utility for x86 and x64 Architectures
Scanning for Target Devices
1580
Figure 6-3 BIOS Status
Scanning for Target Devices
To scan for target devices:
1. From the Main configuration menu, select Scan for Target Devices. This option
only displays a list of discovered target devices. It allows you to quickly verify
zoning and SAN connectivity while providing a mechanism to log in ports for
zoning.
Figure 6-4 Devices Present on the Adapter
2. Press <Esc> to return to the Main configuration menu.
Advertising