Dell Emulex Family of Adapters - Manual (Page 385)

OneCommand Manager Command Line Interface Version 10.2 User Manual P010067-01A Rev. A
5. CLI Client Command Descriptions
iSCSI Commands
385
Parameters
SetiSCSIBoot
This command defines whether a specific iSCSI function’s Boot ROM is active.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
SetiSCSIBoot <MAC_Address> <0|1>
Parameters
SetNetworkConfiguration
This command sets the TCP/IP configuration on a specified port. The required fields
for this command depend upon the values set for <DHCP> and <VLAN_ENABLED>.
Supported By
Linux, Solaris, VMware ESXi, and Windows
MAC_Address
The MAC address of an iSCSI port.
Initiator_Name
Initiator iSCSI name enclosed in quotes (string length: 1–224).
Initiator_Alias
Initiator iSCSI alias enclosed in quotes (string length: 0–32).
ImmediateData
0 = No
1 = Yes (default)
HeaderDigest
0 = None (default)
1 = CRC32C
DataDigest
0 = None (default)
1 = CRC32C
Auth
0 = None (default)
1 = One-Way CHAP
2 = Mutual CHAP
TgtCHAPNam
Target CHAP name enclosed in quotes (string length: 1–256).
TgtSecret
Target Secret enclosed in quotes (string length: 12–16).
InitCHAPName
Initiator CHAP name enclosed in quotes (string length: 1–256).
InitSecret
Initiator Secret enclosed in quotes (string length: 12–16).
MAC_Address
The MAC address of an iSCSI port.
0|1
Specifies the iSCSI boot ROM state:
0 = Disabled
1 = Enabled