Dell Emulex Family of Adapters - Manual (Page 275)

OneCommand™ Manager Application P010066-01A Rev. A
13. Diagnostics
LightPulse FC HBA Diagnostics
275
and click Select. All relevant information for the selected port is automatically
added to the Target Identifier section of the Diagnostics dialog box.
Figure 13-11 Select Echo Test Target Window
3. Define the other parameters you want to use and click Start Test. The following
warning window appears:
Figure 13-12 Advanced Diagnostic Tests Warning Window
4. Click OK. A result screen appears and the test results appear in the Test Log. Click
Clear to erase the contents of the log display or click Save to File to save the log file.
Saving the Log File
You can save the test log to a log file for later viewing or printing. When new data is
written to a saved file, the data is appended to the end of the file. Each entry has a
two-line header that contains the identifier of the adapter being tested and the date and
time of the test. Over time, the data accumulates to form a chronological history of the
diagnostics performed on the adapter. (Not available in read-only mode.)
The default location is:

In Windows: the OneCommand Manager application install directory on your
local drive

In Solaris: /opt/ELXocm/Dump

In Linux: /var/opt/emulex/ocmanager/Dump

In VMware Server: There is no default directory for VMware.