Dell Emulex Family of Adapters - Manual (Page 1386)

OCM for VMware vCenter Version 10.2 User Manual P009805-01A Rev. A
11. Using OneCommand Manager for VMware vCenter Command Line Interface
The Command Reference
1386
Description
This command shows the license ID of the adapter to which the specified port belongs.
Parameters
showpersonalities
Syntax
elxvcpcmd.exe v=<vcenter server> u=<vc_username> p=<vc_pwd> <h=ESXhostIP>
showpersonalities <WWPN | MAC>
Description
This command shows the personalities of the adapter to which the specified port
belongs.
Note: If the active and/or configured configurations are not single personality, the
active and/or configured personality indicators are not shown.
Note: The personalities shown depend upon the availability of the personality, which
is controlled by the profiles that are exposed by an adapter's IPL.
Parameters
Example
elxvcpcmd.exe v=10.192.000.000 u=root p=vmware h=10.192.000.000
showpersonalities 00-00-c9-12-34-56
Adapter Personalities:
NIC
iSCSI
FCoE (active) (configured
v
The vCenter server IP address.
u
The user name for the vCenter server.
p
The user password for the vCenter server.
h
The IP address of the ESXi host with Emulex adapters.
WWPN
The WWPN of a port on the ESXi host with Emulex adapters.
MAC
The MAC address of the NIC port.
v
The vCenter server IP address.
u
The user name for the vCenter server.
p
The user password for the vCenter server.
h
The IP address of the ESXi host with Emulex adapters.
WWPN
The WWPN of a port on the ESXi host with Emulex adapters.
MAC
The MAC address of the NIC port.