Dell Emulex Family of Adapters - Manual (Page 427)

OneCommand Manager Command Line Interface Version 10.2 User Manual P010067-01A Rev. A
5. CLI Client Command Descriptions
Profile Management Commands
427
Profile ID : 37
MC Type : UMC
Port Assignments:
Port 0 (p0): NIC,iSCSI,NIC,NIC
Port 1 (p1): NIC,FCoE,NIC,NIC
Port 2 (p2): NIC,FCoE,NIC,NIC
Port 3 (p3): NIC,iSCSI,NIC,NIC
Note:(pN) labels are the port parameter names to use in the
SetAdapterPortConfig command (e.g. p0=NIC,FCoE p1=NIC,iSCSI).
Enable UMC on 2 Port - 8 Channels/Port
>hbacmd SetAdapterPortConfig 00-00-c9-12-34-56
p0=nic,iscsi,fcoe,nic,nic,nic,nic,nic p
1= nic,fcoe,iscsi,nic,nic,nic,nic,nic mctype=UMC
Successfully changed port configuration. A reboot is required to
complete changes.
>hbacmd getadapterportconfig 00-00-c9-12-34-56
Number of Ports : 4
Maximum FCoE Functions : 4
Maximum iSCSI Functions : 4
Mixed Mode I/O Allowed : Yes
Concurrent Mode I/O Allowed : Yes
ROCE Functions Allowed : Yes
RebootRequired : Yes
Active Configuration
Profile ID : 37
MC Type : None
Profile ID : 37
Port Assignments:
Port 0: NIC,iSCSI,FCoE
Port 1: NIC,FCoE,iSCSI
Reboot Configuration
Profile ID : 37
MC Type : UMC
Port Assignments:
Port 0 (p0): NIC,iSCSI,FCoE,NIC,NIC,NIC,NIC,NIC
Port 1 (p1): NIC,FCoE,iSCSI,NIC,NIC,NIC,NIC,NIC