Dell Emulex Family of Adapters - Manual (Page 1070)

Emulex Drivers Version 10.2 for VMware ESXi User Manual P010087-01A Rev. A
4. Troubleshooting
Troubleshooting the FC/FCoE Driver
1070
elx_mes0492: Unable to allocate memory for issuing SLI_CONFIG_SPECIAL
mailbox command
DESCRIPTION: A memory allocation fault occurred when issuing a mailbox.
DATA: None
ACTION: This could be a transient error. If this issue persists, report these errors to
Emulex technical support.
elx_mes0493: SLI_CONFIG_SPECIAL mailbox failed with status <rc>.
DESCRIPTION: Mailbox command failed.
DATA: None
ACTION: Ensure the adapter’s firmware is current. Unload and reload the driver.
elx_mes0494: Unable to allocate memory for issuing
"SLI_FUNCTION_RESET mailbox command"
DESCRIPTION: Mailbox memory pool allocation error.
DATA: None
ACTION: The driver fails to load. Contact Emulex technical support.
elx_mes0495: SLI_FUNCTION_RESET mailbox failed with status
<shdr_status> add_status <shdr_add_status>, mbx status <rc>.
DESCRIPTION: Mailbox command failed.
DATA: None
ACTION: The driver fails to load. Contact Emulex technical support.
elx_mes0496: Failed allocate slow-path EQ
DESCRIPTION: The event queue for the slow path was not allocated.
DATA: None
ACTION: Unload and reload the driver.
elx_mes0497: Failed allocate fast-path EQ
DESCRIPTION: The event queue for the fast path was not allocated.
DATA: None
ACTION: Unload and reload the driver.
elx_mes0498: Adapter failed to init, mbxCmd <cmd> INIT_LINK, mbxStatus
<status>
DESCRIPTION:
DATA: None
ACTION: None required.