Dell Emulex Family of Adapters - Manual (Page 1117)

Emulex Drivers Version 10.2 for VMware ESXi User Manual P010087-01A Rev. A
4. Troubleshooting
Troubleshooting the FC/FCoE Driver
1117
New Events
elx_mes2796: Mailbox memory allocation failed
DESCRIPTION: The driver failed to get memory resources to release an RPI.
DATA: None.
ACTION: None. The driver's heap is exhausted. A server reboot is required to fix the
exhaustion. Contact Emulex technical support if the issue persists.
elx_mes2798: Unreg_vpi failed vpi <value>, mb status = <value>
DESCRIPTION: The driver attempted to unregister a virtual port index and failed. The
failure status is printed.
DATA: None.
ACTION: This condition is not catastrophic, but is unexpected. If issues persist, contact
Emulex technical support.
elx_mes2813: Mgmt IO is Blocked <value> - mbox cmd <value> still active.
DESCRIPTION: The HBA's management interface is marked as blocked in preparation
for an online or offline state transition. All user space access to the HBA via libdfc
interface will be blocked.
DATA: None.
ACTION: None. Notification of a run-state change only.
elx_mes2822: IOCB failed <value> iotag <value> xri <value>
DESCRIPTION: The driver is attempting to drain an internal queue and failed. The
failure reason and some state variables are written to the console.
DATA: None
ACTION: None required. This should be a transient condition. If not, contact Emulex
technical support.
elx_mes2823: txq empty and txq_cnt is <value>
DESCRIPTION: The driver has detected a discrepancy between the elements queued to
the txq and the counter tracking the number or items.
DATA: None
ACTION: None required. There is nothing for the driver to do except correct the
counter - the txq is empty.
elx_mes2824: Cannot re-enable interrupt after slot reset.
DESCRIPTION: The driver failed to re-enable interrupts following a PCI slot reset
command.
DATA: None