Dell Emulex Family of Adapters - Manual (Page 1186)

OneCommand Manager for VMware vCenter Version 10.2 User Manual P010089-01A Rev. A
4. Managing Clusters
Viewing Information in a Cluster
1186
Adapters Information Field Definitions

Adapter Model – The model of the adapter.

Serial Number – The serial number of the adapter.

Hardware Version – For FC adapters this field shows the JEDEC ID. For
UCNAs this field shows the board type and revision code.

Description – The type of adapter.
To navigate the Adapter Information page:
1. Use the Filter list to filter the adapter information. Choose any of the available
adapter information fields from the list and enter a wildcard for the field and click
Search.
2. Click Clear to clear the search criteria and the corresponding adapter information.
3. Click Refresh to refresh the information. If an adapter is added to any of the hosts,
the adapter information is refreshed.
Viewing Port Information in a Cluster (Host centric mode)
To view port information in a cluster in host-centric mode:
1. Select a cluster in the vSphere console tree-view.
2. Select the Emulex OneCommand tab. Hosts information is displayed.
3. From the Emulex Device Management options, select Ports. The host-centric
information pane is displayed.
4. Make sure the Group by Fabric checkbox is cleared.
Figure 4-3 Host-Centric Cluster View