Showpersonalities, E “showpersonalities – Dell Emulex Family of Adapters User Manual
Page 414
OneCommand Manager Command Line Interface Version 10.2 User Manual
P010067-01A Rev. A
5. CLI Client Command Descriptions
Personality Change Commands
414
ShowPersonalities
This command displays the list of single personalities available on an adapter. The
personality type is displayed as either NIC, NIC + RoCE, iSCSI, or FCoE.
Notes
If the active configurations are not single personality, the active personality
indicators are not displayed.
The available personalities are adapter dependent.
RoCE is only available on Windows operating systems.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
ShowPersonalities <WWPN|MAC>
Parameters
Example
For non-ESXi hosts:
hbacmd ShowPersonalities 00-12-34-56-78-9A
For ESXi hosts:
hbacmd h=<IP_Address> m=cim u=root p=<password> n=<namespace>
ShowPersonalities 00-12-34-56-78-9A
For adapters that include RoCE:
>hbacmd showpersonalities 00-00-c9-12-34-56
Adapter Personalities:
NIC
NIC+RoCE
iSCSI
FCoE (active) (configured)
WWPN
The WWPN of an FCoE port.
MAC
The MAC address of a NIC, NIC + RoCE or iSCSI port.