Dell Emulex Family of Adapters - Manual (Page 1551)

Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual P010097-01B Rev. A
3. Configuring PXE Boot for NIC on OCe14000-series Adapters
Using the PXESelect Utility
1551
Configuring Multichannel Options
To configure the multichannel options:
1. From the Port Menu screen, use the up or down arrow keys to select
1. MultiChannel Configuration and press <Enter>. The Channel(s) List screen
appears.
Figure 3-15 Channels List Screen
2. Select a channel using the up or down arrow keys and press <Enter>. The
Configure Channel screen appears.
Figure 3-16 Configure Channel Screen
3. From the Configure Channel screen, you can perform the following tasks:

View the function number.

Select the protocol for each function, except for PF #0 and PF #1. See
“Configuring Personality” on page 1548 for instructions.

Configure the minimum and maximum bandwidth for each channel. See
“Configuring Minimum and Maximum Bandwidth” on page 1552 for
instructions.

View the permanent and virtual MAC addresses.

View the logical link status.
Note: Logical Link Status is displayed as “N/A” for storage functions.

Configure the LPVID for each channel. For more information, see “Configuring
LPVID” on page 1552.

View the SR-IOV status.