Dell Emulex Family of Adapters - Manual (Page 952)

Emulex Drivers Version 10.2 for Linux User Manual P010081-01A Rev. A
4. Troubleshooting
Log Messages
952
2574: Not enough EQs (<sli4_hba.max_cfg_param.max_eq>) from the pci function
for supporting FCP EQs (<cfg_fcp_eq_count>)
Failed to create the minimum fast-path event queues.
Data: None
Severity: Error
Log:
LOG_INIT
Action: None required.
2575: Not enough EQs (<max_eq>) from the pci function for supporting the
requested FCP EQs (<cfg_fcp_eq_count>), the actual FCP EQs can be supported:
<eq_count>
The driver was not configured with enough fast-path event queues.
Data: None
Severity: Warning
Log:
LOG_INIT
Action: None required.
2576: Failed allocate memory for fast-path EQ record array
Failed to allocate memory for the fast-path EQ record array.
Data: None
Severity: Error
Log:
LOG_INIT
Action: None required.
2577: Failed allocate memory for fast-path CQ record array
Failed to allocate memory for the fast-path EQ record array.
Data: None
Severity: Error
Log:
LOG_INIT
Action: None required.
2578: Failed allocate memory for fast-path WQ record array
Failed to allocate memory for the fast-path EQ record array.
Data: None
Severity: Error
Log:
LOG_INIT
Action: None required.
2579: Slow-path wqe consume event carries miss-matched qid:
wcqe-qid=<wcqe_quid>, sp-qid=<sp_quid>
The consumed entry does not have the slow path’s queueID.
Data: None
Severity: Warning
Log:
LOG_SLI
Action: None required.
2580: Fast-path wqe consume event carries miss-matched qid:
wcqe-qid=<fcp_wqid>.
The consumed entry does not have the fast path’s queueID.
Data: None
Severity: Warning
Log:
LOG_SLI
Action: None required.
Table 4-4 LPFC Error Log Messages and their Descriptions (Continued)