Dell Emulex Family of Adapters - Manual (Page 1344)

OCM for VMware vCenter Version 10.2 User Manual P009805-01A Rev. A
11. Using OneCommand Manager for VMware vCenter Command Line Interface
The Command Reference
1344
dump
Syntax
elxvcpcmd.exe v=<vcenter_server> u=<vc_username> p=<vc_password>
h=<esx_host> dump <WWPN | MAC> core [Options]
Description
This command performs a core dump on a local port (OCe11102 or OCe10102). The
dump file is placed in the dump directory with the following filename format:
<Hostname>_<Adapter serial number>_<datetimestamp>.core
If the command is successful, the following message is displayed:
Dump Successful.
Note: Since this command is dumping memory, it can take time while generating
large files.
Parameters
echotest
Syntax
elxvcpcmd.exe v=<vcenter_server> u=<vc_username> p=<vc_password>
h=<esx_host> echo <WWN | MAC> <Destination WWPN> <Count> <StopOnError>
[Pattern]
Description
This command runs a loopback test on a given FC, FCoE, NIC or iSCSI port.
Parameters
v
The vCenter server IP address.
u
The user name for the vCenter server.
p
The user password for the vCenter server.
h
The IP address of the ESXi host with Emulex adapters.
WWPN
The WWPN of a port on the ESXi host with Emulex adapters.
MAC
The MAC address of the UCNA port.
Options
Additional options are available under the direction of Emulex Technical
Support.
v
The vCenter server IP address.
u
The user name for the vCenter server.
p
The user password for the vCenter server.
h
The IP address of the ESXi host with Emulex adapters.