Figure f-4, Table f-3, Fcoe configuration page – Dell Emulex Family of Adapters User Manual
Page 1766
Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual
P010097-01B Rev. A
Appendix F. Dell UEFI
Main Configuration Page
1766
FCoE Configuration Page
This page allows you to configure FCoE boot parameters.
Figure F-4 FCoE Configuration Page
Table F-3 FCoE Configuration Page Menu Options
Menu Option
Description and Available Settings
FCoE General Parameters
Configure FCoE general parameters. See “FCoE General Parameters
Page” on page 1767 for more information.
World Wide Port Name Target
The first FCoE storage target’s WWPN.
Boot LUN
The first FCoE storage target’s LUN that will be used by the FCoE
initiator as the system boot device.
Connect
Specify whether the FCoE initiator should connect to the first FCoE
storage target defined.
Available settings include:
• Enabled
• Disabled (default)