Dell Emulex Family of Adapters - Manual (Page 497)

Offline and Online Adapter Management Utilities Version 10.2 User Manual P010071-01A Rev. A
4. Offline Adapter Management Utility Command Line Interface
Firmware and Boot Code Download Commands
497
Note: If you are using an FCoE adapter, the readconfig command only supports
reading configuration region 8 and 32.
To read a configuration, type
oslpcfg readconfig n=<adapter number> r=<region number> l=<byte count>
The following example reads the configuration for adapter #1, region 0, byte count 20:
oslpcfg readconfig n=1 r=0 l=20
Sample Response:
00000000: 10000000 c93ccce08
00000008: 20000000 c93ccce08
00000010: 00000000
Firmware and Boot Code Download Commands
Downloading a File (download)
This command downloads a firmware or boot code file to a specific adapter.
The adapter name is the name that appears when you run the listHBA command. For
more information on the listHBA command, see “Viewing All Adapters in the System
(listhba)” on page 494.
To download a firmware image file to an adapter specified by its number, type
oslpcfg download n=<adapter number> i=<firmware image filename>
The following example downloads the zb200a1.prg (x86) BootBIOS file to adapter # 6;
in this example, the x86 BootBIOS file is for an LPe11000 adapter:
oslpcfg download n=6 i=zb200a1.prg
Note: Boot code on OneConnect and 16Gb adapters is updated by downloading
firmware. LPcfg does not support updating boot code separately these adapters.
Accessing the Flash Device Directly (directdownload)
This command directly accesses the flash device on the adapter without using the
adapter firmware. This feature is useful in downloading a ROM file image if the
firmware has been corrupted. The adapter name is the name that appears when you
run the listHBA command. You can also use “default” for the adapter name if there is
only one single-channel adapter or one dual-channel adapter in the system. For more
information on the listHBA command, see “Viewing All Adapters in the System
(listhba)” on page 494.
Notes:

You cannot use directdownload in a script file.

UCNAs and LPe16000 family of adapters do not support directdownload.
You can use this feature on the following Emulex adapters:LP21000 and LP21002.