Dell Emulex Family of Adapters - Manual (Page 573)

Emulex Drivers for Windows User Manual P010077-01A Rev. A
2. Installation
Manually Installing or Updating the Emulex Protocol Drivers
573
4. Open the SCSI and RAID Controllers item.
5. Double-click the desired Emulex adapter.
Note: The driver affects only the selected adapter. If there are other adapters in the
system, you must repeat this process for each adapter. All dual-channel
adapter models are displayed in Device Manager as two adapters, and each
adapter must be updated.
6. Select the Driver tab.
7. Click Update Driver. The Update Driver wizard starts.
8. Select No, not this time. Click Next on the Welcome to the Hardware Update
Wizard window.
9. Select Install from a list or specific location (Advanced) and click Next.
10. Select Don't search. I will choose the driver to install and click Next.
Note: Using the OEMSETUP.INF file to update Emulex's FC/FCoE Storport
Miniport driver overwrites customized driver settings. If you are updating
from a previous installation, write down the settings. Following installation,
use the OneCommand Manager application to restore the previous settings.
11. Click Have Disk... and direct the Device Wizard to the location of oemsetup.inf. If
you have installed the driver installer kit in the default folder, the path is:
C:\Program Files\Emulex\AutoPilot Installer\FC(or FCoE)\Drivers\Storport\x64\HBA
12. Click OK. Select Emulex LightPulse LPX000, PCI Slot X, Storport Miniport Driver
(your adapter model is displayed here).
13. Click Next.
14. Click Finish.
The driver installation has completed. The driver should start automatically. If the
adapter is connected to a SAN or data storage device, a blinking yellow light on the
back of the adapter indicates a link up condition.
Installing or Updating the iSCSI Driver
To update or install the iSCSI driver from the desktop:
1. Select Start>Settings>Control Panel>System.
2. Select the Hardware tab.
3. Click Device Manager.
4. Open the “SCSI and RAID Controllers” item.
5. Double-click the desired Emulex adapter.
6. Select the Driver tab.
7. Click Update Driver. The Update Driver wizard starts.
8. Select No, not this time. Click Next on the Welcome to the Hardware Update
Wizard window