Dell Emulex Family of Adapters - Manual (Page 464)

Offline and Online Adapter Management Utilities Version 10.2 User Manual P010071-01A Rev. A
2. Installation
Extracting the Driver Files from the Offline Adapter Management Utility for Windows
464
Extracting the Driver Files from the Offline Adapter
Management Utility for Windows
To extract the driver files from the offline adapter management utility files, you can use
the installer or the command line. When extracting these files, all files, both x64 and
x86, are extracted to <Drive>:\My Documents\Emulex\Drivers. This location is
hard-coded and cannot be changed.
Note: Extracting all the drivers takes an additional 28 MB. By default, Windows PE
allocates only 32 MB of writeable memory. The size of the writable memory
may be increased when building the WinPE ISO image.
You can extract the driver files using the GUI mode by running the installer or you can
use the command line in silent mode.
To extract the drivers from the offline adapter management utility for Windows:
GUI Mode
1. Run the installer.
2. From the Installation Options screen, select Extract All Drivers, and deselect
Install elxApp_Drivers (64-bit).
3. Click Install to continue.
Silent Mode
From the command line, type
start/wait SetupElxAll-x64.exe/q2 extract=2
Note: Values for the “extract” parameter are:

0 —Install the package; do not extract drivers. (DEFAULT)

1 —Install the package; extract drivers

2 —Do not install the package; extract drivers.
Extracting the Offline Adapter Standalone
Management Utility (Linux and Windows PE)
The Offline Adapter Standalone Management utility is not installed; you must extract it
from its zip file. Once you extract the utility, the following directories are created. The
Linux executable files are extracted to the lx\ directory, or the Windows executable
files are extracted to the win\ directory.

boot\

firmware\

lx\

win\