Dell Emulex Family of Adapters - Manual (Page 380)

OneCommand Manager Command Line Interface Version 10.2 User Manual P010067-01A Rev. A
5. CLI Client Command Descriptions
iSCSI Commands
380
GetNetworkConfiguration
This command lists a port’s TCP/IP information for IPv4 and IPv6 protocols.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
GetNetworkConfiguration <MAC_Address>
Parameters
Example
TCP/IP Configuration for 00-00-c9-ad-ad-b1:
VLAN Enabled: No
VLAN ID: 0
Priority: 0
IPv4 Configuration:
DHCP Enabled: Yes
IP Address: 10.192.81.204
Subnet Mask: 255.255.248.0
Gateway: 10.192.87.254
IPv6 Configuration:
Automatic Assignment: No
Link Local Address: fe80::a1d3:f062:f44a:7577
IP Address 1: fd01::16
IP Address 2: fd02::16
Gateway: fd00::1
GetSessionInfo
This command lists all session information for a specified session.
You must specify the <iscsi_target_name> and either the <TSIH> of the session or the
session’s ISID Qualifier <ISID_Qual> and the target’s IPv4 or IPv6 IP address
<Target_IP>. These parameters tell the command to gather the information from the
specified target and session. You can find the TSIH and ISID qualifier by running the
ListSessions command.
MAC_Address
The MAC address of an iSCSI port.