Dell Emulex Family of Adapters - Manual (Page 1357)

OCM for VMware vCenter Version 10.2 User Manual P009805-01A Rev. A
11. Using OneCommand Manager for VMware vCenter Command Line Interface
The Command Reference
1357
Description
This command shows the priorities and bandwidth percentages for all the priority
groups for the port. Additionally, this command displays the number of priority
groups supported by an adapter.
Parameters
getportstatistics
Syntax
elxvcpcmd.exe v=<vcenter_server> u=<vc_username> p=<vc_password>
h=<esx_host> getportstatistics <WWPN>
Description
This command extracts the statistics for a designated FC or FCoE port.
Parameters
getretentioncount
Syntax
elxvcpcmd.exe v=<vcenter_server> u=<vc_username> p=<vc_password>
h=<esx_host> getretentioncount <WWN | MAC>
Description
This command shows the diagnostic dump file retention count set on a port.
Note: The retention count applies to all adapters in the server.
Parameters
v
The vCenter server IP address.
u
The user name for the vCenter server.
p
The user password for the vCenter server.
h
The IP address of the ESXi host with Emulex adapters.
WWPN
The WWPN of a port on the ESXi host with Emulex adapters.
v
The vCenter server IP address.
u
The user name for the vCenter server.
p
The user password for the vCenter server.
h
The IP address of the ESXi host with Emulex adapters.
WWPN
The WWPN of a port on the ESXi host with Emulex adapters.
v
The vCenter server IP address.