Viewing advanced properties, Figure 12-19 – Dell Emulex Family of Adapters User Manual
Page 1684
Advertising
Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual
P010097-01B Rev. A
12. Configuring UEFI for iSCSI
Adding and Configuring Targets
1684
2. From the Add/Ping iSCSI Target screen or the Edit/Ping Target screen, select Ping
and press <Enter>. If the ping is successful, a screen similar to the following is
displayed.
Figure 12-19 Successful Target Ping
If the ping is not successful, a failure message is displayed.
Viewing Advanced Properties
To view advanced properties:
1. On the Edit/Ping Target screen (Figure 12-18), select Advanced Properties and
press <Enter>. The Advanced iSCSI Target Information screen is displayed.
Advertising