Figure 6-7, Figure 6-8 – Dell Emulex Family of Adapters User Manual
Page 1445
Advertising
Boot for the Fibre Channel Protocol User Manual
P010096-01A Rev. A
6. EFIBoot
Enable or Disable the BIOS
1445
2. Select 1. Enable or Disable BIOS and press <Enter>. The current BIOS status is
Figure 6-7 BIOS Status Screen
3. If the current status is disabled, select Enabled and press <Enter>. The status
changes to enabled (Figure 6-8).
Figure 6-8 BIOS Enabled Screen
You can configure EFIBoot systems for up to eight boot devices. Configure one boot
device at a time. Press <Esc> to return to the EFI utility menu.
Advertising