Dell Emulex Family of Adapters - Manual (Page 751)

OneCommand NIC Teaming and VLAN Manager User Manual P009415-01A Rev. A
2. Installing, Updating, and Uninstalling
Attended Installation
751
Attended Installation
Procedure
To perform an attended installation:
1. From the Emulex website, download the elxdrvr-nic-teaming-<version>.exe to
your system. The installer is an executable file that self-extracts and copies the
following software onto your system:

NIC Teaming driver

NIC Teaming and VLAN Manager

NIC Teaming and VLAN Manager utilities
2. Navigate to the system directory to which you downloaded the file and
double-click the elxdrvr-nic-teaming-<version>.exe file.
Unattended Installation
An unattended driver installation (a quiet or silent installation) requires no user input.
This is useful for performing an installation remotely from a command script, or when
you want to make sure a custom configuration is not changed by a user during
installation.
Procedure
To perform an unattended installation:
1. From the Emulex website, download the elxdrvr-nic-teaming-<version>.exe file to
your system.
The kit is activated with the optional switch /q or /q2. The /q switch displays
progress reports.
The /q2 switch does not display progress report.
2. Run the driver kit installer with the optional switch.
For example, use the following command:
elxdrvr-nic-teaming-<version>.exe /q2
Note: If unattended installation fails, it may be because the operating system
prerequisites have not been met. To ascertain if this is the reason, run the
installation interactively. If you encounter error messages when you run the
installation interactively, the same error messages apply to an unattended
installation. See Table 2-1 on page 750 for a complete list of prerequisites.