Dell Emulex Family of Adapters - Manual (Page 359)

OneCommand Manager Command Line Interface Version 10.2 User Manual P010067-01A Rev. A
5. CLI Client Command Descriptions
Diagnostic Commands
359
LoopMap
Note: Supported for FC ports only.
This command shows the arbitrated loop map data.
Supported By
Linux, Solaris, and Windows
Syntax
LoopMap <WWPN>
Parameters
PciData
This command shows the PCI configuration data (if available).
The PCI registers displayed are specific to the function referenced in the OneCommand
Manager CLI. For example, if you specify the WWPN for the FCoE function, the PCI
registers for that FCoE function return. If you specify the MAC address for the NIC
function on that same physical port, the PCI registers for that NIC function return.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
PciData <WWPN|MAC>
Parameters
Example
C:\Program Files\emulex\Util\OCManager>hbacmd h=10.192.203.154
m=cim u=root p=Swamiji001 n=root/emulex PciData 00-00-c9-93-2f-d6
The example output:
Vendor ID: 0x19A2 Device ID: 0x0700
Command: 0x0406 Status: 0x0010
Revision ID: 0x02 Prog If: 0x00
Subclass: 0x00 Base Class: 0x02
Cache Line Size: 0x10 Latency Timer: 0x00
Header Type: 0x80 Built In Self Test: 0x00
WWPN
The WWPN of the FC port.
WWPN
The WWPN of an FC or FCoE port.
MAC
The MAC address of a NIC or iSCSI port.