Version, Persistent binding commands – Dell Emulex Family of Adapters User Manual
Page 407
OneCommand Manager Command Line Interface Version 10.2 User Manual
P010067-01A Rev. A
5. CLI Client Command Descriptions
Persistent Binding Commands
407
Parameters
Version
This command shows the current version of the OneCommand Manager CLI Client.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
For the RM interface:
hbacmd Version
Note: The “h=” option (for specifying an optional IP address or host name) after
“hbacmd” is not available for the Version command.
For VMware ESXi using the CIM interface:
hbacmd h=<IP address> m=cim Version
Parameters
None
Persistent Binding Commands
Notes
These commands are supported for FC/FCoE ports only.
The following persistent binding commands are not supported on Linux or
VMware ESXi:
BindingCapabilities
BindingSupport
PersistentBinding
RemoveAllPersistentBinding
RemovePersistentBinding
SetPersistentBinding
SetBindingSupport
MAC
The MAC Address of any NIC on the physical port.
0|1
The VEPA state:
0 = Disabled
1 = Enabled