Dell Emulex Family of Adapters - Manual (Page 396)

OneCommand Manager Command Line Interface Version 10.2 User Manual P010067-01A Rev. A
5. CLI Client Command Descriptions
LUN ExpressLane Commands
396
Syntax
RescanLuns <HBA WWPN> <Target WWPN>
Parameters
SetLunMask
This command masks the specified LUNs.
Supported By
Solaris and Windows
Syntax
SetLunMask <HBA WWPN> <Target WWPN> <Option> <Lun> <LunCount> <MaskOp>
Parameters
LUN ExpressLane Commands
Note: ExpressLane is only supported on LPe16000-series FC adapters.
GetExpressLaneLunList
This command displays LUNs on a target and their respective ExpressLane status.
Supported By
Linux, VMware ESXi, and Windows
HBA WWPN
The WWPN of an FC or FCoE port on the adapter.
Target WWPN
The WWPN of the target.
HBA WWPN
The WWPN of an FC or FCoE port on the adapter.
Target WWPN
The WWPN of the target.
Option
0 = Get information from the driver
1 = Get information from the configuration (make persistent)
2 = Send information to both
Lun
The starting LUN number.
LunCount
The number of LUNs.
MaskOp
A = Mask LUN
B = Clear unmask target level
C = Clear unmask HBA level
D = Unmask LUN
E = Unmask target level
F = Unmask HBA level