Dell Emulex Family of Adapters - Manual (Page 167)

OneCommand™ Manager Application P010066-01A Rev. A
8. Managing Adapters and Ports
iSCSI
167
Advanced TCP/IP Configuration
The Advanced TCP/IP Configuration dialog box enables you to add and remove Route
and Address Resolution Procotol (ARP) table entries (applicable to IPv4 only) for the
selected iSCSI port.
Figure 8-36 Advanced TCP/IP Configuration Dialog Box
To add table entries:
1. From the discovery-tree, select the iSCSI port whose configuration you want to
modify.
2. Select the Network Information tab.
3. Click Advanced. The Advanced TCP/IP Configuration dialog box appears.
4. From the Route Table or ARP Table sections, click Add Entry.
5. Enter the Route Table or ARP Table information and click OK. The entry you added
appears in the table.
To delete table entries:
1. From the discovery-tree, select the iSCSI port whose configuration you want to
modify.
2. Select the Network Information tab.
3. Click Advanced. The Advanced TCP/IP Configuration dialog box appears.
4. From the Route Table or ARP Table sections, select the entry you want to delete and
click Remove Entry. The entry you removed is deleted from the table.
Viewing iSCSI VPD Information
The VPD tab displays vital product data (if available) for the selected iSCSI adapter
port such as the product name, part number, serial number and so on.
To view VPD information:
1. Select Host or Fabric view.
2. In the discovery-tree, select the iSCSI port whose VPD information you want to
view.