Dell Emulex Family of Adapters - Manual (Page 87)

OneCommand™ Manager Application P010066-01A Rev. A
4. Using the OneCommand Manager Application
Changing Management and Read-Only Mode
87
Note: After making changes, you must restart the OneCommand Manager application
to see the new management mode settings.

In Windows
1. From the File menu, select Management Mode. The Management Mode
dialog box appears.
Figure 4-4 Management Mode Dialog Box
2. Choose the management type and read-only mode you want.
3. Click OK.

In Solaris
1. Run the following script:
/opt/ELXocm/set_operating_mode
2. Choose the management type and read-only mode you want.

In Linux
1. Stop the OneCommand Manager application.
2. Run the following script:
/usr/sbin/ocmanager/set_operating_mode
3. Choose the management type and read-only mode you want.