Dell Emulex Family of Adapters - Manual (Page 1367)

OCM for VMware vCenter Version 10.2 User Manual P009805-01A Rev. A
11. Using OneCommand Manager for VMware vCenter Command Line Interface
The Command Reference
1367
readwwn
Syntax
elxvcpcmd.exe v=<vcenter server> u=<vc_username> p=<vc_pwd> <h=ESXhostIP>
showpersonalities <WWPN | MAC> [ReadType]
Description
This command shows the WWN details of the specified port and category.
Parameters
reset
Syntax
elxvcpcmd.exe v=<vcenter_server> u=<vc_username> p=<vc_password>
h=<esx_host> reset <WWPN>
Description
This command resets the adapter. An adapter reset can require several seconds to
complete, especially for remote devices. When the reset is completed, the system
command prompt is displayed.
Notes:

Supported only for FC and FCoE ports. Not supported for NIC and iSCSI
ports.
WWPN
The WWPN of a port on the ESXi host with Emulex adapters.
MAC
The MAC address of the NIC or iSCSI port.
v
The vCenter server IP address.
u
The user name for the vCenter server.
p
The user password for the vCenter server.
h
The IP address of the ESXi host with Emulex adapters.
WWPN
The WWPN of a port on the ESXi host with Emulex adapters.
MAC
The MAC address of the NIC port.
ReadType
Valid types are:
0 = Volatile
1 = Non-volatile
2 = Factory default
3 = Current
4 = Configured