Dell Emulex Family of Adapters - Manual (Page 212)

OneCommand™ Manager Application P010066-01A Rev. A
8. Managing Adapters and Ports
OneConnect Adapters
212
For 10GB SFP+, the length is the actual DAC cable length and 0 indicates an optical
cable.
For the QSFP+ module type, a length of 0 indicates an optical cable and any
non-zero length indicates a DAC cable (i.e. the length does need to be the actual
DAC cable length).
5. Click OK.
Note: For an embedded mezzanine adapter linked to an embedded switch on the
internal port, the DAC Cable Length value is ignored.
Viewing PHY Data (OneConnect 10GBASE-T series Adapters
Only)
The PHY Data Tab displays port level operational parameters, error rates, and counters
that are protocol and personality independent for OneConnect 10GBASE-T adapter
ports.
Note: PHY data is not supported via the CIM interface.
To view OneConnect 10GBASE-T adapter port PHY information:
1. Select Host or Fabric view.
Note: iSCSI and NIC-Only adapters do not appear in Fabric view.
2. In the discovery-tree, select the OneConnect 10GBASE-T adapter port whose PHY
information you want to view.
3. Select the PHY Data tab.
Figure 8-68 PHY Data Tab