Dell Emulex Family of Adapters - Manual (Page 304)

OneCommand Manager Command Line Interface Version 10.2 User Manual P010067-01A Rev. A
2. Installing and Uninstalling the CLI
Solaris
304
e. Run the uninstall script with the ssc parameter specified. Type
./uninstall ssc
3. Uninstall the HBAnyware utility and the Application Helper module:
a. Log on as “root”.
b. Change to the directory containing the tar file.
c. Extract the tar file using the tar -xvf command.
d. Change to the newly created directory.
e. Uninstall any previously installed versions. Type
./uninstall
Solaris
Installing in Solaris
Note: Prior to installation, OneCommand groups must be configured on the LDAP
network or the local host machine for Secure Management operation. See
“OneCommand Manager Secure Management Configuration Requirements” on
page 297 for configuration instructions.
Before installing the OneCommand Manager CLI, install the appropriate driver:

The Solaris FC/FCoE inbox driver version emlxs 2.80.8.0 or later or the
out-of-box driver version elxfc 2.85.xx.xx must be installed for FC/FCoE
management.

The NIC inbox driver version oce 4.4.173.9.3S or later or the out-of-box driver
version elxnic 4.1.xx.xx must be installed for UCNA or CFA management.
Note: If Emulex adapters are installed on the system, the NIC driver must be
installed and reporting all NIC ports. Otherwise, the OneCommand
Manager application cannot manage Emulex network adapters.
To install the OneCommand Manager CLI in Solaris:
1. Copy the OneCommand Manager core kit to a temporary directory on the system.
2. Untar the core kit by typing
tar xvf elxocmcore-solaris-<kit version>.tar
3. Change to the newly created elxocmcore-solaris-<kit version> directory:
cd ./elxocmcore-solaris-<kit version>/
4. Run the install script and follow the instructions.
./install
Note: The install script can also be run in non-interactive (quiet) mode. Enter
the following command to view the syntax:
./install --help