Dell Emulex Family of Adapters - Manual (Page 1692)

Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual P010097-01B Rev. A
12. Configuring UEFI for iSCSI
Erasing the Configuration
1692
Erasing the Configuration
Erase Configuration erases the configuration of a single controller. Configuration data
is erased for both ports on the selected controller. Erase configuration restores the
default settings only for that particular controller. When an initiator name is global for
all adapters, the IQN configured on the first adapter is reflected on all controllers.
Note: For HP systems, the initiator name on all ports of the selected controller are
reset to their respective default values.
Note: You must select Erase Configuration to clear out existing IQN data if you
purchase a different or subsequent license for the adapter.
To erase a controller configuration:
1. From the Controller Configuration menu, select Erase Configuration and press
<Enter>.
Figure 12-29 Erase Configuration Screen
A warning message appears asking for confirmation.
2. Press <Enter> to erase the configuration, or press <Esc> to abort the operation.
When the controller configuration is erased, the Controller Configuration menu is
displayed.