Dell Emulex Family of Adapters - Manual (Page 939)

Emulex Drivers Version 10.2 for Linux User Manual P010081-01A Rev. A
4. Troubleshooting
Log Messages
939
1832: No pending MBOX command to handle
Data: None
Severity: Error
Log:
LOG_MBOX
Action: None required.
1835: Vport discovery quiesce failed: state <port_state> fc_flags <fc_flag>
wait msecs <jiffies_to_msecs(jiffies - start_time)>
Could not pause discovery on this VPort.
Data: None
Severity: Error
Log:
LOG_VPORT
Action: None required.
1836: Could not issue unreg_login(all_rpis) status <rc>
The unreg_login cannot be issued.
Data: None
Severity: Error
Log:
LOG_MBOX, LOG_VPORT
Action: None required.
1837: Vport_delete failed: Cannot delete static vport
Static VPorts cannot be deleted.
Data: None
Severity: Error
Log:
LOG_VPORT
Action: None required.
1838: Failed to INIT_VPI on vpi <vpi> status <rc>
Failed to INIT_VPI.
Data: None
Severity: Error
Log:
LOG_VPORT
Action: None required.
2000: Failed to allocate mbox for read_FCF cmd
Failed to allocate mailbox for READ_FCF command.
Data: None
Severity: Error
Log:
LOG_INIT
Action: None required.
2001: Unable to allocate memory for issuing SLI_CONFIG_SPECIAL mailbox command
Unable to allocate memory for issuing the SLI_CONFIG_SPECIAL mailbox command.
Data: None
Severity: Error
Log:
LOG_SLI
Action: None required.
Table 4-4 LPFC Error Log Messages and their Descriptions (Continued)