Figure f-5, Table f-4, Fcoe general parameters page – Dell Emulex Family of Adapters User Manual
Page 1767
Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual
P010097-01B Rev. A
Appendix F. Dell UEFI
Main Configuration Page
1767
FCoE General Parameters Page
This page allows you to configure FCoE general parameters.
Figure F-5 FCoE General Parameters Page
Table F-4 FCoE General Parameters Page Menu Options
Menu Option
Description and Available Settings
Link Up Delay Time
Specify how long (in seconds) the FCoE Initiator waits after an
Ethernet link is established before sending any data over the
network. The valid range is 0–255 seconds.
LUN Busy Retry Count
Specify the number of connection retries the FCoE boot initiator
attempts if the FCoE target LUN is busy. The valid range is 0–60.
Fabric Discovery Retry Count
Specify the retry count for FCoE fabric discovery. The valid range is
0–60.