Dell Emulex Family of Adapters - Manual (Page 133)

OneCommand™ Manager Application P010066-01A Rev. A
8. Managing Adapters and Ports
FC/FCoE
133
3. Select the Target Mapping tab.
Figure 8-13 Target Mapping Tab
Target Mapping Field Definitions
Current Settings Area

Active Bind Type – WWPN, WWNN, or a destination identifier (D_ID).

Automapping – The current state of SCSI device automapping: enabled
(default) or disabled.
Current Mappings Area

This table lists current mapping information for the selected adapter port.
Persistent Binding Configuration Area

This table lists persistent binding information for the selected adapter port. (Not
available on VMware ESXi servers being managed through the CIM interface.)
Display Mode Radio Buttons

Show WWPN, Show WWNN or Show D_ID options enable you to choose how
to display information in the Persistent Binding Configuration table.
Target Mapping Buttons

Refresh – Click to refresh the Target Mapping tab.